Specifications
 |
 |
|
|---|---|---|
| Multimeter | ||
| Voltage Measurement | 10mV to 60V DC, 42V AC (True RMS), ±1% | 1mV to 600V DC, 600V AC (True RMS), CAT III, ±1% |
| Current Measurement | 1mA to 2A max, ±1% | 1uA to 10A AC (True RMS)/DC max, ±1% |
| Resistance Measurement | 1 to 1M Ohm, ±5% | 100m to 1M Ohm, ±1%, 3M Ohm ±5% |
| Temperature | 0°C to 60°C ±1%°C, 32°F to 140°F ±1.8°F | 0°C to 60°C ±1%°C, 32°F to 140°F ±1.8°F |
| External Temperature* |  |
-40 to 120°C ±1% @25°C + 0.05%/°C -40 to 248°F ±1% @77°F + 0.05%/1.8°F |
| Diode Check | Check Only | 0V to 1V |
| Capacitance | |
1nF to 1000μF, ±2% |
| Continuity Check |  |
|
| Continuity Check Delay (max) | 200ms | 100ms |
| Continuity Buzzer | Via Phone | Internal Buzzer |
| True RMS | |
|
| Multichannel** | |
|
| Oscilloscope | ||
| Voltage Measurement | 10mV to 60V DC, 42V AC (RMS), ±1% | 1mV to 600V DC, 600V AC (RMS), CAT III, ±1% |
| Current Measurement | 1mA to 2A max, ±1% | 1uA to 10A AC(RMS)/DC max, ±1% |
| Sampling | 12bit, 1M sample/sec | 12bit, 1M sample/sec |
| Input Impedance (DC) | 1M Ohm | 10M Ohm |
| Acquisition Button | |
|
| One-Time Acquisition | |
|
| Continuous Sampling | |
|
| Trigger | |
|
| Multichannel** | |
|
| Channel Naming | |
|
| RGB Channel Identification | |
|
| Waveform Name/Save/Export | |
|
| Digital Fourier Transform (DFT) | |
|
| Logger | ||
| Logged Parameters | Voltage, Current, Temperature | Voltage, Current, Temperature |
| Logging | 12kB, 45min/sample @ 6 months | 28kB, 20min/sample @ 6 months |
| Sample Rate | 1sec to 1hr | 500ms to 24hr |
| Other Functions | ||
| Device Personal Naming | |
|
| Torch | |
|
| Replaceable Fuse | |
|
| Battery | Button Cell (CR2032) | Rechargeable (USB-C) |
| Battery Life (Paired) | 64kB, 7.2min/sample @ 6 months | 128kB, 2hr/sample @ 6 months |
| USB Rechargeable | |
|
| Battery Gauge | Flat Only | Flat Only |
| Locator | Key Finder | Device Locator |
| Connectivity | ||
| BLE | v4.3 | v5.0 |
| iOS | v9.0 or later | v9.0 or later |
| Android | v5.0 or later | v5.0 or later |
| Open APIs | |
|
| Compliance | ||
| EMC | CE, FCC, RCM, MiC | CE, FCC, RCM, MiC |
| Electrical Safety | N/A |
IEC61010
|
| Physical | ||
| Form | Keyfob (Keychain Mountable) | Pen Style |
| Retractable Leads | |
N/A |
| Storable Leads | N/A | |
| Dimensions | ø 50mm x 18mm, ø 1.96” x 0.709” | 170mm x 30mm x 23mm, 6.7” x 1.2” x 0.91″ |
| Operating Temperature | -10˚C to 60˚C, 14˚F to 140˚F | -10˚C to 40˚C, 14˚F to 104˚F |
| Lead Span (max tip-to-tip) | 480mm, 18.9” | 800mm, 31.5” |
| Probe Tip Length | 6mm, 0.23” | 13mm, 0.51” |
| Weight | 30g, 1.06oz | 78g, 2.75oz |
| Accessories | ||
| Attachable Probe Clips | |
|
| Carry Pouch | Soft Case | Hard Case |
* External Temperature is only measurable with the Pokit Pro NTC Temperature Probe
** Simultaneously display up to 4 measurements/channels using 4 Pokit Pro devices
